Elko eLAN-RF-003 Bedienerhandbuch PDF herunterladen (Seite 31)

RFDSC-11 RFDSC-71

French Schuko British

CZ, SK, PL, FR HU, DE, RU, AT, RO GB

0-100%

Example of use

RF receiver: Universal dimming socket RFDSC-11, RFDSC-71

the dimming socket o ers a simple solution to dimming lamps and lights plugged into the socket,

this socket is simply positioned between the existing outlet and the light

it enables dimming of the following light sources:

the type of light source is set by the switch on the front of the of the device

max. output load is 300 W

electronic overcurrent and thermal protection - switches o the output in case of overload,

short circuit or overheating

setting the minimum brightness by the potentiometer on the front of the device eliminates

flashing of various types of light sources

the actuator can be controlled by up to 32 channels

RFDSC-11: single-function, button dimmer

RFDSC-71: 6 light functions, ON/OFF function (identical with the functions of RFDA-71B) see p. 32

programming and manual switching of the output is performed using the Prog button

produced in three designs of sockets and plugs:

Technical parameters

230 V AC / 50 Hz

1.1 VA

0.8 W

+10/ -15 %

R,L,C, LED, ESL

2 x MOSFET

300 W*

868 MHz

up to 160 m (more on range on page 44)

button PROG (ON/OFF)

-20 up to + 35 °C

-30 up to +70°C

any*

in a network socket 230 V AC

IP 30

III.

60 x 120 x 80 mm

129 g

EN 60669, EN 300 220, EN 301 489

directives RTTE, NVč.426/2000Sb (directives 1999/ES)

Supply voltage:

Apparent power:

Dissipated power:

Supply voltage tolerance:

Dimming load:

Output

Contactless:

Load capacity:

Control

RF command from the transmitter:

Range in open space:

Manual control:

Further data

Operating temperature:

Storage temperature:

Working position:

Mounting:

Protection:

Overvoltage category:

Contamination degree:

Dimensions:

Weight:

Related standards:

Controlling the dimmer:

! a short press of the button (< 0.5s) switches light on or o

! a long press (> 0.5s) enables  uid regulation of light intensity

! for the ESL load, when the lamp is switched off, a short press increases the brightness to the

maximum level (when the energy saver „lights up“) and then drops to the preset level

Setting the minimum brightness:

! performed using the potentiometer on the front side

! used mainly when dimming energy-saving  uorescent tubes and LED bulbs due to their

di ering illumination characteristics

! it prevents unwanted  ashing when setting the actuator to the min. brightness

Description of function

EAN code

RFDSC-11/F: 8595188145923 (French)

RFDSC-11/S: 8595488145930 (Schuko)

RFDSC-11/B: 8595188145459 (British)

type of source symbol description

resistive

ordinary light bulb, halogen lamp

inductive

coiled transformer for low-voltage halogen lamps

capacitive

electronic transformer for low-voltage halogen lamps

LED

LED lamps and LED light sources, 230 V

ESL

dimmable energy-saving  uorescent tubes

* capacity for power factor cos φ=1

The power factor of dimmable LEDs and ESL bulbs ranges from cos φ = 0.95 up to 0.4.

An approximate value of maximum load may be obtained by multiplying the load capacity

of the dimmer by the power factor of the connected light source.

Socket for connecting

a light source

Potentiometer for setting

minimum brightness

Light source selection switch

Button Prog

Supply voltage indication

Device status

indication

Description of the device

RFDSC-71/F: 8595188145947 (French)

RFDSC-71/S: 8595488145954 (Schuko)

RFDSC-71/B: 8595188145466 (British)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Elko eLAN-RF-003 Bedienerhandbuch Seite 31

Kommentare zu diesen Handbüchern